What should I do if the WinXP system is blacked out due to too high resolution setting?

The problem of blue screen and black screen on the computer is often encountered. There are many reasons for these problems, but people usually have a little help with these problems. Recently, a WinXP system user encountered a black screen of the computer. After analysis, it was learned that the resolution setting was too high. How to solve this problem?

Fault reason:

In fact, the black screen of WinXP system caused by high resolution is mainly caused by the resolution of the host graphics card beyond the range supported by the monitor, so we only need to select “ VGA mode & rdquo; to reset the appropriate resolution can be solved.

VGA Mode Description:

VGA mode can use the standard VGA driver to start WinXP system, so you can reset the resolution.

Solution:

1. When restarting the WinXP system first, press the F8 key and select “Enable VGA mode” in the “Windows Advanced Options Menu” and press Enter. ; after

2, the system starts to be completed, right click on the desktop space, select & ldquo; property & rdquo ;;

3, open & ldquo; display attribute & rdquo; window, select & ldquo; disposed & rdquo; tab, set the resolution to the optimal resolution display;

4, may be gradually increased from the default resolution appropriate resolution 640 * 480;

5, Finally, restart, you can enter the normal startup mode.

If you find that the black screen problem still exists after restarting the computer, repeat steps 1-3 to set other resolutions. After many attempts, you will find the resolution of your computer. Of course, the reason for the black screen on the computer is not just this one. The user should analyze the specific problem.