How to set virtual memory is the best state

Virtual memory is very important for the system, but there are some methods for setting it up. Not all methods can set the virtual memory, so how to set the virtual memory is best: virtual memory is too low What to do? Virtual memory settings are fine. You don't have to reinstall the system. It is recommended to set the initial size and maximum value to 1-2 times your physical memory. For example, 1G is set to 2048MB (1G memory is 2 times), 2G memory is recommended. Your virtual memory initial size and maximum value are set to 3070MB (2G memory is 1.5-2 times), setting the same value can avoid easy to generate magnetic disk, 3G is set to 3072-4608MB (3G memory is 1-1.5 times), 4G memory First set to 4096 (4G 啲 1 times is not enough), if you 啲 physical memory is less than 2G or 2G, it is recommended to upgrade your physical memory (the initial size and maximum settings should be consistent). For details on how to set the settings, please see the following tutorial:

How to set virtual memory:

First, how to set up virtual memory reasonably

Virtual memory settings are mainly based on you The actual memory size and your computer's use to set, on the desktop with the mouse right click on "I 啲 computer", select "ldquo" attribute & rdquo;, you can see the memory. According to Microsoft's advice, virtual memory is set to 1.5--3 times the physical memory capacity, such as 512MB of memory, virtual memory is set to 768--1536MB; 1G啲 memory, virtual memory is set to 1536--3072MB. It also allows Windows to actively allocate management virtual memory, which can dynamically adjust the virtual memory size according to the actual memory and application. There is a recommended value at the bottom of the virtual memory settings page. If you don't know that the settings are optimal, it is recommended that the virtual memory be set to the recommended value. The virtual memory has two values ​​of initial size and maximum value. It is best to set the initial size and the maximum value to be the same to avoid the system frequently changing the page file size and affecting the computer operation. With a memory capacity of 2GB or more, you can also turn off virtual memory if you are not running large files or games.

The principle of virtual memory is to use a part of the hard disk space as memory when you have insufficient physical memory. However, since the hard disk transfer speed is slower than the memory transfer speed, the virtual memory is applied more than the physical memory. It is slower. The actual need for personal depreciation should be adjusted several times as well. Setting too large will generate a lot of flaws, which will seriously affect the speed of the system. If the setting is too small, it will not be enough, so the system will prompt you that the virtual memory is too small.

Second, the virtual memory setting method

Right click to click "I 啲 computer", select "properties - advanced - sex can - set - advanced - virtual Memory - change more, select the virtual disk where the virtual memory is located, then click “Customize Size" and write to “initial size" "initial size" and “maximum", and finally “set> ; button, then you can confirm. Virtual memory is set from C drive to other disk. 啲 Way: Right click on the computer - computer -- Properties -- Advanced -- Sex can be set -- Advanced -- Virtual memory is changed -- Click C drive -- Single check " None Paging file”--“Settings"""""""""""""""""""""""""""""" ; and “maximum& rdquo; write the value in two text boxes --“Settings&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

It is best not to set the virtual memory in the same disk as the system. The memory changes dynamically with the application. The C disk is easy to generate disk fragmentation and affect the system running speed. Therefore, it is best to set the virtual memory to a large disk space and not commonly used for disks, such as D and F. This can prevent the system from frequently reading and writing operations on the C disk and affecting the system speed. Virtual memory is set on one disk and can be set on any one disk.

Third, to reduce the memory burden

1, those who actively run the program can not be too much. Click “Start”--“Run”, type “Msconfig”-“OK", open the "System Configuration Utility" window, delete the project that you do not want to actively load.

2, open the program in the computer can not be too much. If you open too many documents at the same time or run too many programs, there is not enough memory to run other programs, you need to close the programs and windows.

I believe this is the way everyone will like this. It is mainly for the purpose of making virtual memory better for the system. Everyone needs to have a good look and hope to be useful to everyone.