If the local connection is limited or there is no connection solution

Local connection is limited or no connection failure Description:

After the computer is installed with broadband, the local taskbar is "local" The connection & rdquo; icon appears with a yellow exclamation mark. View status: "restricted or no connection", point “fix” but can't be repaired, showing that the IP address could not be obtained. However, ADSL can log in normally and can access the website normally.

Restricted or no connection for local connections:

1. Open the “Control Panel”——“Network Connection” to find the current local connection Right click on it and select "Properties", double-click "Internet Protocol (TCP/IP)" in the "General" tab, select "Use the following IP address", generally in "IP" Fill in the address & rdquo; fill out & ldquo; 192.168.0.1 & rdquo;, in the "subnet mask", fill in "255.255.255.0”, do not fill out the other, and then click "determine" to solve the problem. If the problem is not solved, please note that the IP must be in the same network segment as the IP address of the ADSL Modem. If the current computer joins a workgroup or domain, it should be set according to the situation.

2, you can remove the option to notify me (M) when this connection is restricted or no connection in the "local connection" of the network connection " attribute & rdquo;

The reason for the limited or no connection is:

ADSL virtual dial-up is based on PPPoE, which is equivalent to establishing a virtual dial-up between your machine and the ADSL office. Circuit, so local connection is restricted or no connection does not affect the normal use of this virtual circuit (of course, the virtual circuit runs on the real circuit, your network card, ADSL Modem and the central ADSL access device must first establish a physical connection In order for this virtual circuit to work properly, the local connection in the physical connection does not have to be assigned the corresponding IP address on the software system). When two computers are used to form a small local area network, this phenomenon is basically impossible.