Teach you how to become a 25-hour system full-speed speeding skills in 1 day

In this fast-paced era, many people often send out “I really hope that there will be more hours per day”. But how can we make the day more than 24 hours? Is it a joke? No, it is still possible! Although we can't change the real time, we can get more effective "utility time”. In fact, you only need to do some simple things, you can use 24 hours to complete 36 hours. Just from the point of view of computer operation, we can make every day & nbsp; extended & rdquo; 1 hour. Note: The following news is not an exact calculation, just a divisor.

Speed ​​up, grab from the BIOS first

After pressing the power switch, the computer first runs the BIOS detection system, although the process is already fast, but we can make it faster.

1. Remove the floppy drive detection

The newly bought machine basically does not have a floppy drive. It is completely unnecessary to check the BlOS self-test. We can set it manually. No. Here, the Award BIOS is used as an example. For other versions of the BIOS, refer to the manual that came with the motherboard. After booting, press the Del key to enter the BIOS setup interface, select the Standard CMOS Features via the arrow keys and press the Enter key to enter. Also select the Drive A & rdquo; with the arrow keys, and then press the PageDown key continuously to the item. The value is None. Similarly, set the following "Drive B" to None, and set the following Floppy 3 Mode Support to Disabled, press FlO to save and exit.

2. Reduce startup device query

In the BIOS we can set the priority boot device, many people set the first boot device to CD-ROM or floppy drive, but in fact most of the time we are Boot directly from the hard disk, so set the hard disk as the priority boot device, you can also save a little time: BIOS settings main interface choose to enter Advanced BIOS Fetures (advanced BIOS features), select First boot device (first boot device), press PageDown continuously The key sets the value of this item to “HDD-O” (the first partition of the hard disk), press FlO to save and exit.

3. Speed ​​up self-test

During BIOS self-test, some hardware tests should be repeated several times. If you set Quick Power On Self Test in Advanced BIOS Fetures to Enable, you can skip Repeat the test to save time.