Amazing Windows system boot method collection

If someone asks you, how does your computer boot? The answer is nothing more than: “Directly press the power switch button on the computer case and you won’t get it”. This is of course the easiest way. However, there are still many ways to open the computer. Here I will introduce you to four magical computer boot methods.

Method 1: Set the timed boot The Real Time Clock (RTC) on the motherboard is responsible for the timing of the system. We can specify the boot time through the RTC, just like an alarm clock. However, since this function is rarely used, some motherboards that provide this function (such as INTEL original motherboard) can't be turned on at the specified time, so it is best to test the user before using it.

The specific operation mode is as follows: 1. After the computer is turned on, press the “Del” key to enter the BIOS setting screen according to the prompt message on the screen. The setting function related to the regular power-on is generally placed in “Power Management Setup”. Under the option. 2. There is an option in the BIOS that "RTC Alarm Poweron" should be set to “Enabled” (enabled). After that, the user can set the date, hour, minute and second of the scheduled power on. 3, in order to ensure that the computer automatically and correctly realize the function of timed automatic booting, the user must first check whether the system time in the BIOS of the motherboard is the same as the real time. 4. The last step is to remember to save the settings in the BIOS of the motherboard and save it at the preset time. Some motherboards can also be set to automatically boot from the BIOS at the same time every day by changing "RTC Alarm Date" to "Every Day". However, you should be reminded that if you use the BIOS to boot automatically, you can only use one account in the Windows operating system of the user. Otherwise, it is impossible to automatically boot and then automatically log in to Windows.

Method 2: Booting with a keyboard/mouse If the computer case is placed in a hard-to-reach place, booting with a keyboard/mouse is a good solution. However, it should be noted that this function only supports keyboards and mice connected by PS/2 interface. It is not possible to connect using USB interface. Enable the option of “Power On By PS/2 Keyboard” in the BIOS of the motherboard, you can choose different boot hotkeys, such as Ctrl+E is the most common boot hotkey. Or select "Power Key"; you can use a separate power button on the keyboard to boot, but only if some keyboards that meet the Keyboard 98 specifications support this feature. Of course, the power button on the chassis can still be used. As for booting with the mouse, it is very simple. The setting options in the BIOS are similar to the keyboard boot settings, and then the computer can be started with a click of a mouse button.

Method 3: Wake on the network To use the Wake On LAN (WOL) network wake-up function, you need network card support, and the WOL-capable network card has a special signal cable to connect to the WOL interface on the motherboard, which is responsible for transmitting the boot signal to the motherboard. However, there are currently not many motherboards with WOL interfaces, and manufacturers have changed to provide WOL functions on the network chips built into the motherboard. The principle of WOL is that when the computer is turned on or in the S5 sleep mode (Suspend to Disk), the network card still maintains the basic operation at a very low voltage. At this time, other computers on the network can transmit a software called “&ldquo Magic Packet's magic packet to the computer to wake up. After receiving the signal, the network card will send a power-on signal to the motherboard to enable the motherboard to boot. Since the computer is still powered on before waking up, we need to know the MAC address of the NIC (each NIC has its own unique MAC address, the software uses this to identify). The specific use of the network wake-up function is as follows: First, open the WOL option in the motherboard BIOS. Note that some motherboards only support wake-up from S5 mode (Wake On LAN from S5). Second, download the WOL software from the Internet. This network wake-up software, called "Magic packet", is easy to set up and use. After running, there are only 5 options in its operator interface. Among them: the NIC's "MAC Address" (MAC address) column, the user can enter the "ipconfig /all" rd command in the command line mode of the Windows operating system to obtain. In addition, the “Internet Address” column is the section to be broadcast. In this column and in the “Subnet Mask” column, enter “ld255; 255, 255, 255, 255” for local broadcast (Local). Broadcast). The fourth column is “Send Options” and should be selected “Local Subnet”. The fifth column "Remote Port Number" is free to enter. Note that the above settings are only for the local network (Local LAN). If you want to wake up via the Internet, you will have more questions and will not be discussed here. Finally, click the “Wake Me UP” button at the bottom of the interface to wake up the computer from the network.

Method 4: Turn on the TV card The TV card with automatic power-on function has been put on the market in large quantities. After connecting it, use the software provided by the TV card to set the boot time. The automatic boot mode of the TV card can be roughly divided into three ways: The first one is a product that has an automatic boot function, and the power cord of the chassis needs to be connected to the TV card and then transferred out; the other is to use the sleep mode to boot. TV card. Among them, the second method is still consumed because the computer is not actually shut down, so not all users are willing to adopt it. The following mainly introduces the specific operation of the first automatic boot method. 1. First, the user should connect the lead pins of the computer switch button on the chassis to the “Power Switch” pin of the TV card during installation (the author takes the Kangbo X800 TV card as an example). 2. Then connect another set of the TV card to the power pin on the motherboard, and finally install the TV card into the PCI expansion slot of the motherboard, so that the internal connection is completed. 3. After the hardware is installed, the supporting software of the TV card (such as the Kangbo PVR2) also needs to be set. Mainly in the "reservation recording settings" function, users should check the "Enable automatic boot function". 4. If the Windows operating system in your computer is more than one user, set it to “Enable automatic login” mode, and enter the user name and password to complete the entire setup step