How do two computers share files? How do computers in a LAN transfer files?

Two computers on the LAN need to use the sharing function to transfer files. In XP, sharing is also subject to many restrictions. We need to set these restrictions one by one to use sharing easily. Then we should How to configure a shared environment? See below.

a sharing condition:

1, the computer may configure the IP address and the LAN communication;

2, turn off the firewall;

3, change "local strategy";;

4, share the folder you need to access.

END

1. Configure the IP address

First configure the IP address on the computer A”

(1), at the beginning menu & rdquo; open & ldquo; control panel & rdquo ;;

(2), to find & ldquo; Fi & rdquo; open;

(3), right single & ldquo; local connection & rdquo; - & ldquo; property & rdquo ;;

(4), double-click & ldquo; Internet protocol (TCP /IP) & rdquo ;;

(5) select & ldquo; use the following IP address & rdquo ;;

(6), in & ldquo; ip address & rdquo; and & ldquo; Subnet Mask & rdquo; are input & ldquo; 192.168.1.55 & rdquo; and & ldquo; 255.255.255.0 & rdquo ;, determined;

(7), in & ldquo; computer B & rdquo; repeat steps 2-8 on, & ldquo; ip address & rdquo; and & ldquo; Subnet Mask & rdquo Change to “192.168.1.66” and “255.255.255.0”, OK.

END

2, turn off the firewall

(1), open the control panel;

(2), to find & ldquo; Windows firewall & rdquo; & ldquo; closed & rdquo ;;

(3), stand-alone & ldquo; OK & rdquo ;.

END

3, change “local strategy”

(1), & ldquo; start & rdquo;--& ldquo; run & rdquo; enter “gpedit.msc&rdquo ;“OK"            accounts: Limit local account use of blank passwords to console logon only & rdquo; double click;

(3), double-click instead & ldquo; disabled & rdquo; and OK.

END

4, need to access shared file folder

(1), right & ldquo; File & rdquo; - & ldquo; property & rdquo ;;

(2), select “share”--&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

END

5, access to the file

Finally, & ldquo; computer A & rdquo; & ldquo on access; computer B & rdquo ;, opens on the computer A & ldquo; Start Menu ”--“Run” Enter: \\\\192.168.1.2\\test OK, you can access.

END

Note:

1, two computers are configured with the IP address, is the first big step;

2, which computer to share on the computer to operate the second step 2-4;

3, after use, "to account: the local account with a blank password is only allowed to log in to the console ”Revert to “deactivated”, if turned on, may be unsafe.

After the shared files are used, it takes some effort to cancel the sharing, because sharing is very unsafe for system security.