WinXP computer dual-screen display setting method

In general, a host is only equipped with one display; as people's requirements for reality are getting higher and higher, dual-screen display has become an object of increasing concern for users. Recently, users of WinXP system want to have 2 monitors for one computer, but don't know how to set up the dual screen display of the computer. How to set up the WinXP computer dual screen display? Now Xiaobian will talk to you about the WinXP computer dual screen display settings.

The method/step is as follows:

1. Connect two monitors according to the dual interface of your computer graphics card. If the interface is not supported, convert the interface of the graphics card with the adapter and then connect. The computer is turned on as shown below, your monitor is not lit:

2. After the hardware is properly connected, upgrade your graphics card program now (because most computers use GHOST to install the system, the graphics card program To simplify the program, if it is not installed, you can download the driver wizard to automatically upgrade the graphics card program. Set up your graphics card after the upgrade is complete. (Currently there are mainly three types of graphics cards & mdash; — Intel integrated graphics, ATi series graphics cards, NVIDIA series graphics cards. The settings of these three graphics cards are slightly different, but basically the same), the following NVIDIA graphics card as an example explain. There are two ways to open the NVIDIA graphics setup program. As shown in the figure:

3, the left side of the "set multiple monitors", click on the right side of the 1 in the independent configuration, irrelevant (dual-screen display mode) & rdquo; in 2 You “ original computer display + analog display & rdquo;, select your main display in 3 items, point & ldquo; application button & rdquo;.

4, point & ldquo; is & rdquo; button

5, then another display has been lit, showing the desktop icon

6, you The display used is different, so change the resolution of your display. Set the resolution of your main display as shown below:

7. Set the resolution of your analog display as shown below (please note what is the best resolution for your analog display):

8, the settings to this display have been completed. Go through your application! ! !

9. Open the program you need and zoom to half screen. Drag your program to the analog display and display it in full screen. (You can drag multiple programs to the analog display)

As shown above and below:

10. Open your other programs for additional work. As shown below:

The above is the content of the WinXP computer dual-screen display setting method; users who need to use two monitors, do not know how to set the dual-screen display can be set according to the above method steps.