WinXP system MAC address modification method

MAC address, also known as physical address, hardware address, is used to define the location of the network device, in general, the MAC address is fixed in the network card. Each IP address and MAC address are also bound. If you change a computer, you cannot access the Internet. You can only access the Internet after modifying the MAC address. How does the WinXP system modify the MAC address? Today, Xiaobian will talk to you about the way to modify the MAC address of WinXP system.

The method is as follows:

First, the MAC address is modified

1. Right click on "Network Neighborhood & mdash;— Attribute". Or right click on the network connection icon in the lower corner of the desktop and click “open network connection”.

2. Right click on “Local Connection ——Properties”.

3, then click “Configure ——Advanced”, then find the "Network Card Location (some write Network Address or Locally Administered Address)" in the properties list"; then click “Value&rdquo Enter the MAC address you want to change.

Second, check the MAC address

1. Click “Start ——Run”, enter “cmd”.

2. Enter “ipconfig/all” Enter.

The above is the entire content of the WinXP system MAC address modification method. The MAC address can be manually modified by yourself. You still don't know how to modify your MAC address. Please take a look at the above content. After reading it, you will know how to modify the MAC address.