WinXP system installation did not find the hard drive reason analysis and its solution skills

Recently, WinXP users installed WinXP system on their own computers, found that the hard drive can not be found. How to solve this problem? Now Xiaobian will share with you the reasons for the problem and the solution.

Recommended: WinXP New Year's Eve Edition Download

Cause Analysis:

1. The hard disk setting in BIOS is incorrect

If there is no correct setting in the BIOS Hard disk parameters, then you will be prompted to find the hard disk during the installation.

2. Hard disk cable is loose

The hard disk cable will cause the computer to boot correctly and the hard disk will not be recognized correctly.

Solution:

1 Manually identify the hard disk in the BIOS

Step 1: After restarting the computer, press the corresponding button to enter the BIOS (usually the Delete key or F2). key).

Step 2: Select the “ Main & rdquo; menu.

Step 3: If it is an IDE hard drive, select the “ Pirmary IDE Master ” and “ Primary IDE Slave & rdquo; menu and press Enter. If it's a SATA hard drive, try selecting the menu from & ldquo; SATA 1 & rdquo; to & quoquo; SATA 6 & rdquo; and press Enter (Figure 1).

1 followed by a hard type selection menu corresponding

Step 4: all the option selection interface are set to & ldquo; Auto & rdquo; (FIG. 2).

2 hard disk options are set to & ldquo; Auto & rdquo;

Step 5: Save the BIOS settings, BIOS settings, please save operation to participate in 1.1.5 section.

2 Reconnect the hard drive data cable

Step 1: Turn off the computer and unplug all the power plugs from the computer.

Step 2: Open the chassis.

Step 3: Carefully unplug the data cable connected to the hard disk.

Step 4: Carefully unplug the data cable connected to the motherboard.

Step 5: Reconnect the data cable firmly.

Step 6: Plug in the cover and plug in the power.
Previous12Next Total 2 Pages