XP blue screen prompt code 0X0000000A solution

When we use XP system, we often encounter various blue screen problems. For these blue screen problems, rookie users always seem helpless. Today Xiaobian will tell you about the solution to the blue screen code 0X0000000A in WindowsXP.

often appear blue screen, blue screen before

0x000000d1 (0x00000006,0x00000002,0x00000000,0xB9DCB504)

NDIS.SYS-Address B9DCB504 base at b9dc8000,0atestamp 41107ec3

0x0000000a (0x0000000e8, 0x0000000002, 0x00000004, 0x806e5a16)

STOP message 0x0000000A failure (when just joining a new device)

Usually the driver uses an abnormal memory address .

1. During the installation process, the screen prompts “When the installer is checking the computer hardware configuration”, press F5 and select the appropriate computer type according to the prompts. For example, if the computer is a single processor, select “Standard PC”.

2. Disable the memory cache function in the BIOS.

3. Remove all adapter cards and disconnect all hardware devices that are not necessary to start the computer

4. If the system is equipped with a SCSI adapter card, please sell it to the adapter card. Ask for the latest Windows 2000 drivers, disable the sync negotiation feature, and check the SCSI ID number of the termination header and device.

5. If the system is equipped with an IDE device, set the IDE port to Primary. Check the Master/Slave/Only settings of the IDE device. In addition to the hard drive, remove all other IDE devices.

6. Run the system diagnostic tools provided by the computer manufacturer, especially the memory check.

7. Check the Microsoft Compatible Hardware List (HCL) to ensure that all hardware and drivers are compatible with Windows 2000.

8. Restart your computer. At the startup screen, press F8 to go to “Advanced Startup Options” and select “Last Known Good Configuration”.

Possible Causes

There is too much accumulation of dust in the memory, and the fault is caused? 缟?钔?Failed (this depends on whether you are very computer-friendly, consider this first)

Driver Exception

The driver used an abnormal memory address

Memory address access error. 0x0000000A and so on represent the memory address, indicating that the address of the error is these. To put it simply, there is a problem with a part of your memory or it is broken. The memory module can be used, but when you access these addresses, it will be blue screen

The above is the blue screen code 0X0000000A of WindowsXP. The reasons and solutions, users who have encountered such problems, don't worry, try to use the small introduction method to repair the computer.