How to fix the XP system blue screen code 0x1000000a?

When users use XP system, sometimes there will be a blue screen, and its code is displayed as 0x1000000a (0xffbdf800, 0x00000002, 0x00000000, 0x804f5d86), etc. How to solve the blue screen problem? Now Xiaobian will introduce the solution to this problem for everyone.

xp system blue screen code 0x1000000a (0xffbdf800, 0x00000002, 0x00000000, 0x804f5d86) Solution:

1,0x0000000A: IRQL_NOT_LESS_OR_EQUAL

Error Analysis: There are mainly by The driver of the problem, caused by defective or incompatible hardware and software. From a technical point of view, it is indicated that there is too much process internal request level (IRQL) in kernel mode to access memory addresses that it does not have access to.

Solution:

Example 1: When installing windows2000/xp, in addition to checking whether the hardware is fully compatible, the following measures should be taken.

(1) During the installation startup process, press the F5 key when the message “Setup is inspecting your computer‘s hardware configuration” appears, and when prompted, specify the correct computer type and hardware abstraction (HAL) ). For general users (only one CPU is installed), the capture specifies "Standard PC HAL".

(2) Turn off all cache and shadowing settings in the CMOS settings, plug and play options and virus protection.

(3) Disconnect hardware that is not necessary for computer startup, including network card, internal modem, sound card, and second hard disk. Also check whether the jumper of the hard disk is set as the main jumper and check if the jumper of the optical drive is correct.

(4) If you upgrade from windows2000 to windowsxp, you also need to uninstall all anti-virus software and startup management software (such as: Norton, Goback, etc.), and remove all unnecessary hardware, disconnect all USB devices and printer. Previous12Next page Total 2 pages