Hand to the disease in addition to broadband connection 769 wrong solution

Recently encountered a troublesome thing, my system is Windows Vista Home Basic, a few days ago installed Tietong ADSL broadband, the next day I have problems . Just a few minutes after the Internet suddenly dropped, and then the connection is not connected, the title bar is "ldquo; error when connecting to the broadband connection" window, the content is roughly: can not connect to the specified target, error 769, how is this back What about the problem? How to solve this problem? Please refer to the professional staff for details:

Broadband connection error 769

Error 769: Unable to connect to the specified target.

Question: This refers to a problem with your computer's network device

Solution:

Open “My Computer”→“Control Panel” →“Network Connection”, check if the local connection is in

“disable” status, if you just double click on the local connection, you can see that the status changes to “enabled” . If there is no local connection,

then your network card is 100% problematic —— not installed or broken. Please contact your computer supplier or solve it yourself.

Error 769 error occurred, most of the NIC is disabled, enabled! The cause is generally: user's misuse or some firewall software, computer viruses, is very common. If the local connection is not found, the driver of the network card is lost or the computer does not detect the network card. You can reinstall it.

Cause: The network card is disabled

Solution: Please click Right click on the computer, select Properties, then select Device Management, then look at the NIC driver status. If it is a “x”, the NIC is disabled, right click to activate the NIC.

Broadband Connection Error 769 Causes and Solutions

Broadband Connection Error 769 Cause

Normally, you will receive error 769 if one of the following conditions exists :

1. The network cable has been disconnected.

2. The modem is disabled.

3. The modem driver is corrupted.

4. Spyware is running on the computer, which prevents the connection.

5.Winsock needs to be fixed.

6. The third-party firewall software blocked the connection.

Solution:

To find out the cause of the problem, follow the steps below.

Step 1: Make sure the network cable is connected

Make sure that the network cable is connected to your computer and modem. If your computer is connected to a hub or router, make sure the cable that connects the hub or router to the modem is connected.

Step 2: Make sure the network adapter is enabled

1. Click “Start”, click “Run”, type ncpa.cpl, and then click “OK&rdquo ;

2. Right click on the “local connection” icon. Click “Enable” (if this option is available).

Step 3: Reset the modem

1. Disconnect the cable from the computer to the modem.

2. Turn off the modem. If the modem does not have a power switch, turn off the power to the modem.

3. Wait two minutes.

4. Turn on the modem and connect the cable from the computer to the modem. Previous12Next page Total 2 pages