Several reasons and solutions for decomposing the blue screen of xp system

Recently, my friend always asked me if his computer is a blue screen. The computer crash or blue screen is mainly caused by software or hardware. Let's explain it to everyone:

Hardware Aspects

1. The current CPU and graphics card have good overclocking performance due to the new technology, but overclocking can easily cause system instability or even crash (damage hardware for the time being ). For the phenomenon of crash caused by overclocking, the frequency should be reduced in time or the rated working frequency should be restored to ensure the stable operation of the computer.

2. When replacing the computer accessories, after the installation is complete, be sure to check it again to see if the hardware has been inserted to prevent the deadlock caused by poor contact.

3. Sometimes due to the conflict between the various hardware caused by the crash, then try to refresh the new version of the BIOS for the board, update the driver or change the interrupt number of the device in the system, it is not possible Please replace the hardware.

4. Before upgrading the BIOS of the motherboard or graphics card, be sure to determine whether the version number of the BIOS to be upgraded matches the model of the board. It is strongly recommended to back up the original version, just in case. .

5. There is a lot of dust in the air. Over time, a large amount of dust will accumulate in the chassis. In this case, it should be cleaned up in time. Otherwise, the heat dissipation effect will be seriously affected, and the dust will cause a short circuit when it contacts the board circuit. Caused a crash.

6.<;Strictly monitor> The temperature of each accessory, especially when the summer is coming, the weather is hot. If the temperature of the accessory is too high, it will cause a crash.

7. The BIOS of the motherboard must be set properly, although many newspapers, magazines and websites now teach you how to set the BIOS to the optimal, but the optimal settings are not necessarily the most stable. . If the computer crashes due to improper BIOS settings, you should immediately restore the BIOS to the factory default settings.

8. The computer host must be equipped with high-quality and high-performance power supply, because the current computer accessories consume a lot of power, especially when overclocked, the power consumption will double, if the power is insufficient at this time. The hardware will be out of power, causing a crash.

9. In the case of small memory (less than 128M), it is best not to run software and games that use more memory or run multiple programs at the same time, which will lead to insufficient physical memory, causing crashes. .

Previous 12 Next Total 2 Pages