A:GHOSTERR.TXT error occurred during GHOST operation?

This is the Ghost software to copy and write data in the process of reading and writing errors, a dialog box pops up, the purpose is to save the error message to the A disk. Since it is a read and write error, generally appear A: \\ GHOSTERR .TXT error has the following conditions:

1.ISO file is correct or ISO download is incomplete, no matter what way to download must check MD5 code

2. CD quality: due to purchase CD Or the quality of the disc is faulty and the recovery fails

3. The quality of the optical disc drive: recovery failure due to the deterioration of the laser head aging reading capacity

4. Recorder: because the recorder burns Poor quality or aging leads to problems with the quality of the discs that are burned out.

5.How to burn: The disc is not easy to read due to the fast recording speed. It is recommended to select 16X/24X speed for recording at the time of recording. Br>

6.Super-engraving: Recovery failure due to incomplete data due to exceeding the capacity of the disc, generally suitable for 680M

7. Hard disk has bad sectors: GHOST cannot be caused by bad sectors Write

8. Hard disk problem: Completely format the C drive, do not add Q ( Example: format c:)

9. The hard disk does not have a drive letter: recovery failure due to loss of partition table caused by virus or other

10. Overclocking: recovery due to overclocking instability Failure

If you eliminate the above problem and still read the disk error, it may be other hardware problems. A complete hardware system consists of many components, they are an organic whole. If a key component is unstable in quality, The whole machine will run unstable. Running Ghost in such a system will naturally lead to errors. According to experience, you should first suspect memory, try to replace the memory. Double memory compatibility. Second, check the motherboard, hard disk (and Data line), then pay attention to whether the CPU's heat is normal. Since everyone has their own experience and methods, here only point to the end.

Many brands have this problem, hidden before the main partition A manufacturer installed partition is used for the whole system detection, so you should pay attention to this problem when performing GHOST on the brand machine.