Microsoft's XP system is called by most netizens to be the best operating system in history, with dazzling features and faster speeds. Of course, all this is for the hardware of the computer. For higher requirements, if you want Windows XP to take up as little of your limited system resources as possible, you can do it for a small operation according to your needs.
Although XP is claimed by Microsoft as the most stable and powerful Windows operating system ever, and it runs fast —— startup speed is even faster than the same configuration of Windows 2000, you may still be unsatisfied Here, I hope that XP will perform at its best, or your hardware configuration is not too high, and you want Windows XP to run more smoothly.
This article will give a detailed introduction to some settings that can improve the efficiency of the system. I hope that friends who have already installed Windows XP can help.
First, use the plain interface
XP default interface after the installation includes the taskbar, start menu, desktop background, windows, buttons, etc. are all XP's luxurious, dazzling style, but the shortcomings are obvious, they will consume A lot of system resources are lost, but the practical significance is not great.
Method:
Right click on the blank space of the desktop, click on the pop-up menu and click “Attributes” to enter the display property setting window, and set “Themes, Appearance” to “Windows Classic”. Set the desktop background to “no", press OK to save and exit.
Second, reduce the loading of the project at startup
Many applications will be added to the system startup group when installing, each time the system will automatically run, which not only extends the startup time, but also the system resources have been completed after the startup Have been eaten a lot!
Method:
Select “Start” Menu"Run", type “msconfig”Start“System Configuration Utility", enter “Start” In this window, the items and sources loaded at system startup are listed. Check carefully whether you need it to load automatically. Otherwise, clear the check box before the project. The fewer items you load, the faster the startup will be. This item needs to be restarted to take effect.
Third, optimize visual effects
Select “System Properties">Advanced” tabs into the "Performance Options" interface where “visual effects” For the best, best appearance, best performance, customization. The more effects you select, the more system resources you use. Selecting the “Best Performance” item will close all visual effects such as fades, smooth scrolls, and slide openes listed in the list.
Fourth, turn off system restore
By default, the system restore function is enabled, each drive is occupied up to 4% to 12% of the hard disk space, and the system restore system automatically creates a restore point, so Running in the background will take up more system resources.
Method:
Right click on the desktop “My Computer" Properties”Enter“System Properties”Settings window, select “System Restore”Label, will <; Turn off System Restore on the drive to be selected.
[#page_XPSystem Optimization Experience Feel General Feeling #0#0#0#0#]
V. Speed up menu display speed
Run Registry Editor and enter “HKEY_CURRENT_USERControl PanelDesktop”, the name will be The data value of MenuShowDelay is changed from the original default of 400 to 0. After the modification, the start menu of XP and even the display menu of the application software will obviously speed up.
Sixth, enable DMA transfer mode
The so-called DMA, that is, direct memory storage mode, refers to computer peripherals (mainly refers to the hard disk) can directly exchange data with the memory, which can speed up the hard disk read and write speed, improve the speed of the data transmission rate .
Method:
Select “ System Properties" in the "Hardware" tab, open “Device Manager", where “IDE Controller” has two Primary IDE Channel” And “Secondary IDE Channel”, go to “Properties & Rarr; Advanced Settings”, the dialog box will list the transmission mode of the device connected to the current IDE interface, click the list button to set “Transfer Mode” to “ld”; DMA”
Seven, mobile temporary file storage path
Most application software will generate temporary files at runtime, and these temporary files are saved in the boot partition C disk by default, long time frequent reading and writing C disk is very easy to generate a large number File fragmentation, which affects the performance of the C drive, and the C drive is the partition of the storage system boot kernel file. The performance of the C drive directly affects the stability and operational efficiency of the system.
Try to install the application software in a partition other than the boot disk and regularly organize the hard disk. This will minimize disk fragmentation and keep the startup or read/write speed at its best.
Internet Explorer Temporary Folders
In the main IE window, go to “Tools →Internet Options →General”Label, open “Internet Temporary Files Setting interface, click “Mobile Folder The ” button will move the temporary directory saved in the C drive to the drive other than the C drive. If you are using broadband, you can set the "temporary folder" space to the minimum value of 1M
Temporary files
Files will be saved in the burn temporary folder of the C drive before burning, enter the Explorer, select the drive letter and click the right-click menu's "Properties" item, in the "record" The temporary folder can be placed on other drives under the ” tab.
My Documents
Right click on “My Documents", in the property settings, you can change the default save path of “My Documents to other drive letters.
VIII. Increase virtual memory
Enter the “Advanced” setting window of “Performance Options”, first adjust “Process Plan” and “Memory Usage” to “ldquo; Program” ; optimization mode. Click the “Change” button to enter the virtual memory settings window. If your memory is larger than 256M, it is recommended that you disable the paging file.
The default paging file is 1.5 times the physical memory. Disabling the system cache requires a system reboot. If your memory is lower than 256M, please do not disable the paging file, otherwise it will cause the system to crash or you can no longer start XP!
In addition to the CPU and hard disk, XP running performance depends largely on the memory, in view of the current price of memory has dropped To the bottom, I strongly recommend that you upgrade your memory to more than 512M (preferably 1G) so that you can experience the charm of XP more!