Computer blue screen memtest detected more than 100 problems in memory

Computer shop news Recently, the computer always has a blue screen immediately after the screen is screened. After doing the system N times, there is no result, and the problem remains. I saw someone on the Internet saying that using memtest to detect the memory, I took the next test, I am 4G memory (2GX2), there are more than 1000 problems when detecting the first one. In the past, this computer was used very well, and there has never been such a situation. The computer configuration is very general. The computer probably bought for more than a year. I have not found any big problems before. This time I feel a little troublesome. I can't find the problem where I am. Analysis of netizens: 1. Most of the screens are memory or graphics cards. In a few cases, the monitors and data cables lead to memory replacement tests. The memory is no problem and then consider other, and the default BIOS settings are restored. 2, there is no memory replacement, there are checks under the graphics card, 2G memory can be installed Win7 system to try. Unplug the bad memory, just use a single memory to run and see if there will be problems. If it is not, it will be a memory problem. You will try to check the graphics card or change the memory. 3, look at your description should be hardware problems. Undoubtedly, if you can use the replacement method, you can replace the memory, graphics, monitor, motherboard, data connection to see which hardware is a problem. If you have no conditions, you can only re-plug the memory, clean up the dust and see if you can't take it for repair.