Windows XP system shutdown special settings

Computer shop news Start-up acceleration, shutdown also acceleration. Windows XP has prepared a shortcut for fast switching, which is standby and hibernation. Let's share it today and how to use these two commands skillfully.

Method /Steps

1. Shutdown Acceleration One-Click Standby Open “Control Panel”→“Power Options”, Select “Advanced” Tab , set here “ "Press the computer power button" & rdquo; drop-down menu, in which check "ld"; sleep & rdquo; or “ standby & rdquo;. Once the settings are applied, you can use one-click standby. For example, before work, there is a work to be continued tomorrow. Just press the power button on the chassis and you can leave work. The next day, press the power button to quickly enter the system and continue the work that was not completed yesterday. When you resume from standby, you may be sneaked into the data on your computer. In this regard, in the "Advanced" tab, check "When the computer resumes from standby, ask for the password" item, add a security protection for standby.
   
   

2. create & ldquo; Sleep & rdquo; sleep button first in & ldquo; Power Options & rdquo; dialog & ldquo; sleep & rdquo; tab, the VGH & ldquo; Enable Hibernation & rdquo; function. Then right click on the desktop, select “New”→“Shortcut" in the pop-up menu, and enter the “rundll32.exepowrprof.dll, SetSuspendState” command in the "Create Shortcut" dialog box. Click “Next” in the “Select Program Title” dialog box to enter “Hibernate”. “ After completing ”, right click on the “Hibernate” shortcut on the desktop, open the dialog box and select the “Shortcuts” tab, and press the shortcut key you like in the “Shortcuts” button. “F8”. Once set, simply press the “F8” key to achieve one-click sleep.
   
   

3. reasonable set of standby power In many cases, only temporarily leave the computer, then you do not need to turn off the power of the majority of hardware devices, such as USB port, Ethernet, mouse, and other equipment, which can Improve recovery speed. Take the network card as an example, open the “Device Manager”, right click on the NIC project, and select the “Properties” command in the pop-up menu to open the property settings dialog box. Select the “Power Management” tab and uncheck the “Allow the computer to turn off this device to save power” option by clicking Apply. Use the same method to disable the power off function of devices such as USB and mouse.
   
   

4. off standby power it can not be an ordinary method standby power off, because the data is stored in memory, once the shutdown, it will result in data loss. To shut down, only sleep is used, but sleep starts longer. If you use the STR technology of the motherboard power supply, you can turn off the power while in standby, and it takes only a few seconds to restore the computer to work. Most motherboards support STR technology. Take the Soyuz SY-I5PRLE motherboard as an example. After booting, go to the CMOS settings page and select “PowerManagementSetup” to set the power management settings. After entering, find the "ACPISuspendType” item, set it to “S3(STR)” mode, save the CMOS settings. When the standby is used in the future, the power of the chassis will be automatically turned off. When the power button of the chassis is pressed, the system can be restored to the saved state during standby at high speed.
   
   
   

   Notes
   
   

5. When using the stand-STR technology, not cut off the power supply board, or save the data will be lost. In addition, to wake up the system through the mouse and keyboard in the standby state, you can set it in CMOS, and set "PS/SKB/MSWakeupFromS3-S5" to "Allow".