Windows XP computer can not shut down? 6 strokes to easily solve the problem

1, the loader can not shut down due to excessive

run & ldquo; Msconfig & rdquo ;, the program at startup Off off point

2, note & ldquo; advanced power management & rdquo; can not lead to the shutdown

in addition & ldquo on the computer; advanced power management (APM) & rdquo; function can also be Causes a shutdown or black screen problem. To determine if APM will cause a shutdown problem, open “Device Manager” to open “System Devices”. In the "Advanced Power Management" section, uncheck "Enable Power Management". If the computer shuts down gracefully, the cause of the problem may be APM.

3, the sound file when you exit Windows damage caused will not shut down

First of all you can determine the & ldquo; quit Windows & rdquo; if the sound file is corrupt & mdash; & mdash; open & ldquo ; control panel & rdquo;, open & ldquo; sound & rdquo; will "exit Windows" rd sound; cancel. If Windows shuts down normally, the problem is caused by exiting the sound file. To solve this problem, you can restore the sound file from the backup or reinstall the program that provides the sound file, or you can define "Exit Windows" as silent.

4, Config.sys or Autoexec.bat in question can not lead to the shutdown

Extract one file

Also from the installation disk, you can check Config Whether there is a conflict in the .sys file or the Autoexec.bat file. Use a text editor to view the contents of these two files to see if there are any extra commands. You can also use “rem” to disable the execution of certain statements and gradually eliminate them until you find conflicting commands.

5, check CMOS settings can not lead to the shutdown

CMOS settings are not correct computer shutdown can cause the same problem, you can enter the CMOS setup page when the computer starts, the focus Check whether the settings of CPU FSB, power management, virus detection, IRQ disconnection, and disk boot sequence are correct. The specific setting method can refer to your motherboard manual, which has very detailed setting instructions. If you don't understand the setting, it is recommended that you use the factory default settings directly.

6, ie start shutdown failure

We often encountered at the right time in Windows has just started on the show & ldquo; you can safely turn off your computer & rdquo ;, or Failures such as shutting down immediately at startup or restarting when shutting down. The cause of this type of failure is generally caused by damage to Wininit.exe or Vmm32.vxd files. The solution is to retrieve these two files from the WINDOWS installer archive. Put it in the Windows\\system subdirectory, rename Vmm32.vxd to Vmm32.XXX, and then open “system tools”, select “system information”——“tool” System File Checker, select <; Extract a file from the installation disk", enter “Wininit.exe” or “Vmm32.vxd”. Repeat this step to replace the file Wininit.exe or Vmm32.vxd.

Notes

Many windowsxp friend's computer users should come across cases xp computer does not shut down, it is a very bad mood thing! above method specially provided to help you one by one to troubleshoot the cause and solve the problem, in order to quickly restore a failed shutdown function.