How to modify the second level cache does not speed up WinXP

Among the many XP optimization techniques, the more popular one is that Windows XP requires the user to manually open the secondary cache of the CPU, so that the CPU can achieve maximum efficiency. This is widely circulated, and one of the most used Windows system optimization softwares, "Windows Optimizer", holds the view that there is an option to optimize the CPU's L2 cache in its optimization settings bar. Let's first take a look at how this so-called optimization technique tells us. [Windows XP system, the CPU secondary cache is not turned on by default. In order to improve system performance, we can open it by modifying the registry or by using software such as "Windows Optimizer". Run the registry editor, expand the HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Control\\Session Manager\\Memory Management branch, double-click "SecondLevelDataCace" in the right window, and then directly fill in the CPU of the current computer in the pop-up window. The level of cache capacity is fine. The Celeron processor's L2 cache is 128KB, and its value should be set to 80 (hexadecimal, the same below). PII, PIII, P4 are all 512KB L2 cache, should be set to 200; PIIIE (EB), P4 Willamette only 256KB L2 cache, should be set to 100; AMD Duron only 64KB L2 cache, should be set to 40; K6- 3 has 256KB L2 cache; Athlon has 512KB L2 cache; Athlon XP has 256KB L2 cache; Athlon XP (Barton core) has 512KB L2 cache. Using Windows Optimizer can also correctly set the CPU's L2 cache: Start Windows Optimizer, select "System Performance Optimization", in the "File System Optimization", the top is about the CPU L2 cache settings. Once you drag the slider to the appropriate location, save your settings and restart your computer. 】 Is this really the case? We found the following in Microsoft's knowledge base: The value of the SecondLevelDataCache key in the "HKLM\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Memory Management" is only read in the Windows XP system from the Hardware Abstraction Layer. The data of the SecondLevelDataCache key is read only when the CPU L2 cache (L2) fails. And the meaning of the SecondLevelDataCache key value = 0 is 256KB for the second level cache. Original (English) In a knowledge base article we also found "Do not change the SecondLevelDataCache entry", in this case, pointed out in the article that some third-party data claimed to modify the value of the SecondLevelDataCache key can improve system performance is not correct . The value of the L2 cache is detected by the operating system and is completely unaffected by the SecondLevelDataCache value. Original (English) From the Microsoft Knowledge Base article we can see that the so-called Windows XP system requires users to manually open the secondary cache is wrong. The Windows XP system reads the secondary cache value of the CPU based on the hardware abstraction layer. The value of SecondLevelDataCache is read only when the read fails, and the default value of 0 of SecondLevelDataCache represents the meaning of the second level cache is 256KB instead of closing. Therefore, the secondary cache of the CPU is turned on at any time, and the user does not need to modify it.