Resolve system failure "A disk read error" failure

Computer boot A disk read error occurred Press Ctrl+Alt+del to restart, press Ctrl+Alt+del to restart, A disk read error occurred Press Ctrl +Alt+del to restart can not enter the system, the author below talks about the restart: "A disk read error" trouble and solution.

Restart appears: "A disk read error" Possible cause and solution

1. Check if there is a floppy disk in the floppy disk, then enter the BIOS and start the A disk in the boot sequence. .

2. In the BIOS settings, set "Antivirus protection" to "Enable". If this is the reason, go into the BIOS and turn off “Antivirus Protection”.

3, write boot area error. Restore the BIOS to the default, then re-plug the optical drive data cable, or change the optical drive data cable.

4, the hard disk has problems. The problem is usually on the hard drive cable and the hard drive bad track. If it is on the connection line, unplug the cable, remove the dust on the dust and the dust on the hard disk, and then plug it in or replace the cable.

The ultimate solution to restart: "A disk read error"

1. Start the computer with the windows98 boot disk (or other CD with boot function), enter DOS, enter fdisk /Mbr rewrites the master boot record.

2, use the CD with GHOST to restore the system. If the C drive has something important, please first connect the hard drive to another machine and copy it out and restore it (just copy the C drive).

3, if there is no backup system before, you can only reload. Then it's best to remember to use ghost to back up the system.

Causes the computer to restart: "A disk read error" has many reasons, but the main problem is the system and BIOS settings. If you have similar problems, you can press the above. Ways to try one by one.