20 strokes Windows XP classic application skills

I have been using Windows XP operating system for many years, very familiar with the application of Windows XP operating system, today I recommend 20 very useful Win XP skills for everyone.

. 1, view detailed system information

Open "command prompt," or type "cmd" in the "Run" dialog box, enter the "command prompt" Status "SystemInfo ", press the Enter key, the system will start detecting relevant information and return to the current window, you can see whether Windows XP has installed patches, initial installation time, virtual memory settings and other details.

2, let the computer do the CD player

can not use a computer to listen to any CD player, the speaker wire directly to the headphone jack of the CD-ROM drive, into the CD, press the play button on the CD-ROM drive You can listen directly, so listening to songs can not occupy system resources. (If your computer is broken, you can't start it or something, you can't fix it at that time, don't waste resources, use the power supply inside to power on the CD-ROM, you can temporarily do the CD machine

3, remove the menu delay

order to achieve visual realism, Windows XP when you open the menu will slide out of the effect, but this will delay the opening speed. we can be found at HKEY_CURRENT_USERControl PanelDesktop "MenuShowDelay" primary key to its value to "0" you can remove the menu delay effect.

4, view the encrypted disk and file

Windows XP has a higher safety performance, if When setting up users, the permission protection function is used. Other users cannot directly access your folder. Even the system administrator will not work. This is safe, but it is a very headache when you have problems. If you happen to encounter this Problem, you must log in as Administrator and then close in the "Advanced Settings" list window in the "View" tab of the folder options Use the Simple File Sharing checkbox. Then return to the appropriate folder or disk partition, select the "Properties" command in the associated menu, switch to the "Security" tab, and you can see any users that are not allowed to access. Click the "Advanced" button to enter the advanced settings interface. Switch to the "Owners" tab, if there is a list of your users, select it, and select "R replace sub-container and object owner" under the interface. Checkbox, click "Apply" to add the settings, at this point you can see your name in the "Permissions" tab. Of course, if you are allowed to add new access users in the "Permissions" tab, You can ignore the above operation.

Click the "OK" button to return, you can now access the original encrypted folder, or disk. Also, if you see a very "Pemissions" tab The long "S-1-5-21-xxxxx" and so on are all digital users, this may be the previously created username, but it is corrupted, select the user, In the following: "Inherit from part of permission entries that apply to child objects. Inculde these with entrIEs rules defined here. Inheriting from the parent items that can be applied to child objects, including those explicitly defined here." box. select the associated interface "copy (copy)" command, then you can delete the unwanted user.

5, change the restart method resolve the shutdown problem is that some

The motherboard's advanced power management is not supported by Windows XP. Generally, the motherboard with AWARD's BIOS does not have this problem. So far, the motherboard that has encountered the AMI BIOS has this problem, such as Gigabyte's motherboard. The solution is to upgrade your motherboard's BIOS, that is, refresh BiOS, this is a more dangerous operation, it is best to ask experienced people to help you.

6, turn off autoplay

Once you insert the media into the drive to run automatically reads the data from the drive, which will cause the program settings file and music on audio media start immediately. You can disable this function by using the following method: Click "Start" → "Run", enter "gpedit.msc" → "Computer Configuration" → "Administrative Template" → "System" in the dialog box, double-click "Close AutoPlay" , select "Enabled" in "Settings", OK.

7, clear the page file at shutdown

Open "Control Panel", click "Administrative Tools" → "Local Security Policy" → "Local Policies" → "Security Options" and double-click "Shutdown: Clean up virtual memory page file" item, click the "Enabled" option in the pop-up menu, and click "OK".

8, quickly close the window

If you have multiple windows open at the same time, you want to close, you can hold down shift and click and hold the upper right corner of the window close icon

9, quickly save

page before saving the page, you can click the "ESC" key (or work offline) and then save, save so soon

10, automatically shut down to stop responding

the Windows XP operating system, this setting enables Windows XP to diagnostic testing when an application has been stopped accordingly when it automatically shut down, without the need for cumbersome manual intervention. To achieve this function, please click "Start" → "Run" to enter "RegEdit" to open the Registry Editor, find the HKEY_CURRENT_USERControl PanelDesktop branch, set the AutoEndTasks key value to 1.

11, to reduce the waste of disk space

while the operating system is running Windows XP, often produces a file extension such as tmp, bak, log, old, txt, etc., in fact, these documents It can be safely deleted, even including the bmp file under the Windows directory, if you don't like the wallpaper that comes with Windows XP. These files can be completely deleted.

emp directory in the Windows XP operating system, Windows files, I also recommend that you delete the extra files that are in the process of installing the application software left behind. Another point is that the small files in the hard disk, please put them together as much as possible, and then use WinZip compression software to merge into a large file, thus reducing the waste of disk space.

12, remove the DLL file

not be used in the memory [Start] - & gt; [operation] - & gt; type [Regedit] - & gt; [HKKEY_LOCAL_MacHINE] - ->[SOFTWARE]-->[Microsoft]-->[Windows]-->[CurrentVersion], add an item [AlwaysUnloadDLL] in [Explorer], the default value is set to 1. Note: If the default value is set to [0], this function is disabled.

13, memory performance optimization

Windows XP, there are several options to optimize memory performance, all of the following location in the registry:

HKEY_LOCAL_MacHINESYSTEMCurrentControlSetControlSession ManagerMemory Management

1) disable memory paging (paging Executive)

under normal circumstances, the XP will be written to disk memory fragments, we can do to stop it, so that data retention In memory, thereby improving system performance. It should be noted that users with a lot of memory (more than 256M) can use this setting. The name of this setting is just like its function, called "DisablePagingExecutive". Changing its value from 0 to 1 disables memory paging.

2) to enhance the system cache: the LargeSystemCache key from 0 to 1, Windows XP will put the system memory in addition to 4M fully allocated to the file system cache, which means that XP kernel can Running in memory greatly increases system speed. The remaining 4M of memory is used for disk caching. XP will allocate more when needed under certain conditions. In general, this optimization will result in a considerable increase in system performance, but it may also degrade some applications. As mentioned before, you must have more than 256M of memory to activate LargeSystemCache, otherwise don't move it.

3) Input /output performance: the optimized only for server users have real meaning - it can enhance system performance when transferring large file. By default, this key does not exist in the registry. You must create a DWord (double-byte value) key, named IOPageLockLimit. Most people use this optimization to find the best performance between 8 and 16 Mbytes. What value can be set, you can set it to see which value can get the best performance. Remember that this value is calculated in bytes, so if you want to allocate 12M, it is 12 * 1024 * 1024, which is 12582912. As with the previous memory optimization, it is only necessary to change the value when your memory is larger than 256M.

14, set the processor L2 cache capacity

Windows XP does not automatically detect the processor secondary cache capacity, we need to manually set the registry, first open the registry (run Enter "Regedit"), then open: HKEY_LOCAL_MacHINESYSTEMCurrentControlSetControlSession ManagerMemory Management

Select "SecondLevelDataCache", according to the processor settings you use, for example, PIII Coppermine/P4 Willamette is "256", Athlon XP is "384" ", P4 Northwood is" 512 "

15, to restore the previous driver hardware

discovery system instability or hardware does not work after a new hardware drivers installed, simply Select the "Driver Recovery" button in the "Device Manager" to restore to the previous normal system state. However, the printer driver cannot be restored.

16, so that Windows XP read letters

find the "Accessibility" group in the "Narrator" program, click on "Sound" button, enter the "Sound Settings" interface for some settings Then save it. When you point your mouse at a dialog box, menu, and button with English letters, you will hear a male voice reading English letters.

17, see Internet usage time

In Windows XP, we can see our past time online through the "Event Viewer." Here's how: Open the Control Panel, double-click Administrative Tools, and open the Event Viewer. In the window on the left, select the "System" option, right-click, select "Properties" in the pop-up shortcut menu, select the "Filter" tab in the "System Properties" window, and select "In Event Source" RemoteAccess". Click the "OK" button to return to the "Event Viewer" main window. In the right window, the start time and end time of the Internet will be displayed. The earlier of the two adjacent times is the time when you started surfing the Internet. Later, it is the time to go offline.

18, modify the Windows XP logon background pattern

the face of long-term change in the monotonous pattern login, you may Boredom, we can put it through the registry to replace your favorite The pattern, the steps are as follows: open the registry editor, find the HKEY_USERS.DEFAULTControl PanelDesktop subkey branch, double-click wallpaper, type the path of the image you selected, such as: c ocuments and SettingsMy DocumentsMy Picturesmypic.bmp, click "OK", then Find Tilewallpaper, double-click it and enter the key value "1" to restart the system.