Six Tips to Improve Win XP Speed ​​(1)

Six Tips to Improve Win XP Speed ​​

Win XP has become the first choice for many computer players with its gorgeous operation screen and stable performance. Operating system, but in the process of using Windows XP you will find that the operating system is getting slower and slower over time. How to improve the speed of Windows XP has become a topic of great concern to users. 1. Speed ​​up the startup. Every time you start Windows XP, the blue scroll bar will tirelessly walk a few laps. For those who pursue high efficiency, do you really want it to take a few laps? In fact, we can completely reduce its scrolling time to speed up the startup. To do this, open the Registry Editor, expand the HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Session Manager Memory Management PrefetchParameters branch, and find the EnablePrefetcher subkey in the middle window of the right window, and change its default value “3” to “ 1”. Next, right-click on the desktop and click "My Computer", select the "Properties" command, select the "Hardware" tab in the window that opens, click the "Device Manager" button . In the “Device Manager” window, expand ““IDE ATA/ATAP Controller”, double-click the “Secondary IDE Channel” option, and select ““Advanced” tab in the pop-up dialog box, at &ldquo In the device type & rdquo; in the device & rdquo;, the original & ldquo; automatic detection & rdquo; changed to & ldquo; no & rdquo;, & ldquo; OK & rdquo; and then exit. “ The main IDE channel & rdquo; modification method is consistent. Now restart your computer and see if your scroll bar scrolling time is reduced? Note: Friends who use the VIA chip motherboard must not modify the "VIA BUS MASTER IDE CONTROLLER" option. In addition, if you do not choose to create multiple different hardware profiles, or if you want to automatically load the default hardware profile during startup without displaying the list items, you can select “ seconds in the <quo;hardware profile selection” Enter in “0” Pressing the space bar while you need to select will display the list. 2, optimize the network neighborhood Windows XP network neighbors in use, the system will first search for their own shared directory and printers that can be used as a network share and schedule tasks related to the network and related tasks, and then displayed, which will directly affect the computer Running speed. If it is not necessary, it should be deleted. The specific steps are as follows: In the Registry Editor, find HKEY_LOCAL_MACHINE\\sofeware\\Microsoft\\Windows\\Current Version\\Explore\\RemoteComputer\\NameSpace, delete the {2227A280-3AEA-1069-A2DE08002B30309D} (printer) and {D6277990-4C6A- 11CF8D87- 00AA0060F5BF} (scheduled task), then restart the computer, when you visit the network neighborhood again, it is found that the running speed has increased. 3, speed up the switch speed When shutting down in Windows XP, the system will always send a message to the running program and the remote server, notify them that the system should be shut down, and wait for the response to receive the system before the system starts to shut down. If we want to speed up the boot, we can first set the time to automatically end the task. To do this, open the Registry Editor, expand the HKEY_CURRENT _ USER Control Panel Desktop branch, and locate the AutoEndTasks subkey, setting it to 1. Then set the "HungAppTimeout” subkey under the branch to “1000”, and <;WaitTOKillService” to “1000” (default is 5000). By resetting this way, the shutdown speed of the computer can be significantly accelerated.

4, quickly switch to different working environments in order to meet various needs and adapt to different working environment, you can create a number of different hardware profiles at the same time. In the “Hardware Profile” dialog box, press the “Copy” button to back up the current hardware configuration file and rename it. This is done in different working environments. Go to the “Hardware Profile” dialog box, use the up and down arrows to move the configuration file, and place the most commonly used ones at the top. Select ““ on the hardware configuration file selection” and wait for the user to select the hardware configuration file. , restart the computer to see the "hardware configuration file selection menu". This setting method is more practical for users who use laptops. It can create multiple hardware profiles for different occasions. It is convenient to switch and greatly improve work efficiency. 5, to mention the speed of broadband As we all know, the professional version of Windows XP retains 20% of the bandwidth by default, in fact, this does not have much effect for our individual users. Instead of being idle, use it as follows: Enter gpedit.msc in "start →run" to open the Group Policy Editor. Find & ldquo; Computer Configuration & Rarr; Management Template & Rarr; Network & Rarr; QoS Packet Scheduler & rdquo;, select the right side of the "restricted bandwidth can be reserved", select "properties" & rdquo; open the limit can retain the bandwidth properties dialog box, select “Disable” After this reset, you can release the reserved 20% of the bandwidth. 6. Clearing redundant hardware information in the system It is a common thing to use plug-in hardware devices in daily work. This process of repeatedly installing the driver will leave a lot of hardware registration information in the system, which will slow down the system and how to clear it. What about this redundant hardware information? First click on the “Copy” button to save (Profile 2), then rename it, for example, to Profile, and then restart the computer. At this point, there will be a prompt for you to choose: “1. Profile. 2. Profile1 3. None of the above “, here “1” and “2” is the hardware configuration file already exists in the system, of course we choose “3”, so that Windows can re-detect the hardware, the screen will appear “Detect hardware” dialog box, and prompts "about a few minutes", the dialog box that appears later, "Configure Settings", prompts "ld"; successfully set the configuration of the new computer, the name is Profile1&rdquo ;, click the “OK" button to reinstall the drivers for the hardware device. Finally, remove the two hardware configuration files except Profile1 to prevent you from still asking which hardware configuration file to use when booting. Ok, after our carefully adjusted WIN XP is faster and more user-friendly. Interested friends may wish to give it a try!

4, quickly switch to different working environments in order to meet various needs and adapt to different working environment, you can create a number of different hardware profiles at the same time. In the “Hardware Profile” dialog box, press the “Copy” button to back up the current hardware configuration file and rename it. This is done in different working environments. Go to the “Hardware Profile” dialog box, use the up and down arrows to move the configuration file, and place the most commonly used ones at the top. Select ““ on the hardware configuration file selection” and wait for the user to select the hardware configuration file. , restart the computer to see the "hardware configuration file selection menu". This setting method is more practical for users who use laptops. It can create multiple hardware profiles for different occasions. It is convenient to switch and greatly improve work efficiency. 5, to mention the speed of broadband As we all know, the professional version of Windows XP retains 20% of the bandwidth by default, in fact, this does not have much effect for our individual users. Instead of being idle, use it as follows: Enter gpedit.msc in "start →run" to open the Group Policy Editor. Find & ldquo; Computer Configuration & Rarr; Management Template & Rarr; Network & Rarr; QoS Packet Scheduler & rdquo;, select the right side of the "restricted bandwidth can be reserved", select "properties" & rdquo; open the limit can retain the bandwidth properties dialog box, select “Disable” After this reset, you can release the reserved 20% of the bandwidth. 6. Clearing redundant hardware information in the system It is a common thing to use plug-in hardware devices in daily work. This process of repeatedly installing the driver will leave a lot of hardware registration information in the system, which will slow down the system and how to clear it. What about this redundant hardware information? First click on the “Copy” button to save (Profile 2), then rename it, for example, to Profile, and then restart the computer. At this point, there will be a prompt for you to choose: “1. Profile. 2. Profile1 3. None of the above “, here “1” and “2” is the hardware configuration file already exists in the system, of course we choose “3”, so that Windows can re-detect the hardware, the screen will appear “Detect hardware” dialog box, and prompts "about a few minutes", the dialog box that appears later, "Configure Settings", prompts "ld"; successfully set the configuration of the new computer, the name is Profile1&rdquo ;, click the “OK" button to reinstall the drivers for the hardware device. Finally, remove the two hardware configuration files except Profile1 to prevent you from still asking which hardware configuration file to use when booting. Ok, after our carefully adjusted WIN XP is faster and more user-friendly. Interested friends may wish to give it a try!